What's included (pair flash units):
- 2 x adjustable digital 180w/s studio flash units
- 2 x adjustable height 2 metre light stands
- 2 x 5 metre (16ft) length UK power leads with UK mains plugs
FM180P Digital Studio Flash Lighting Set
The two self-contained, compact monolight units in the FM180P Digital Studio Flash Lighting Set produce a short, high output 1/1000s burst of up to 180w/s power with easy digital menu control adjustment from 1/16 to full in 0.1f stop steps (guide number 44 metres) providing enough power to light larger areas, isolate products and freeze action of models where required.
With features such as overheat protection circuitry, switchable 'flash-ready' buzzer signal, user replaceable plug-in flash tube and 'self-learning' preflash suppression circuitry these are sophisticated as well as compact units. Easy and accurate adjustment of height and angle allow ideal positioning from 840mm (33") minimum to 2040mm (80") maximum height and the tripod light stands fold down for compact storage and portability.
With integral umbrella slide mounts and a small 9.5cm diameter compact body ready to accept suitable softboxes, snoots, barndoors and colour gels (available separately), there's plenty of flexibility to add external lighting control.
Triggerable by integral slave optical sensor from other flash units or infra red, PC-sync wire or wireless radio flash trigger systems. (Wireless is the ideal method and transmitter/receiver systems are available at extra cost. Accessory details).
- Output: 11.25 - 180 w/s
- Guide Number: 44m / 144 ft
- Recycle Time: 2.3 seconds
- Flash Duration: 1/1000s
- Power Adjustment: 1/16 - full in 0.1f stop steps
- Proportional modelling light output
- Color Temperature: 5600k
- Sync Voltage: DC5V
- 9.5cm diameter compact body accepts range of accessories
- Operating Voltage AC220-240V 50Hz (IEC connector)
- Printed user manual
UK and European 220V-240V 50Hz/60Hz specification
As standard, the flash units are supplied with detachable 5 metre (16ft) power leads with UK mains plugs and connect to the units via standard IEC earthed three pin connectors. The flash units have integral fuses.

For European countries such as France, Belgium, Germany, Spain and Portugal the flash units are supplied with detachable 5 metre power leads with earthed Schuko Euro plugs. For customers in Switzerland the flash units are supplied with detachable 5 metre power leads with earthed 3 pin Swiss plugs.
For other countries using 220V-240V 50Hz/60Hz mains power supply, the supplied power lead may be replaced with a suitable locally sourced, IEC ended, earthed 3-pin lead if required. (please ask for details). IEC ended, earthed power leads are the same type of lead used for the vast majority of personal computers. |